Hikvision DS-K1T342MFWX-E1 Face + Fingerprint Terminal

Hikvision DS-K1T342MFWX-E1 — Face + Fingerprint Terminal

Face, fingerprint and card at the door, in one wall-mounted terminal

Hikvision’s DS-K1T342MFWX-E1 is a compact face recognition terminal from its Value Series with a built-in fingerprint sensor and a 13.56 MHz card reader. A 2 MP dual-lens camera recognises a face in under 0.2 seconds at 0.3 to 1.5 m, with face anti-spoofing and recognition of people wearing masks, and the 4.3-inch touch screen guides each person at the door.

It holds 1,500 faces, 3,000 fingerprints and 3,000 cards, stores 150,000 events, and runs from standard PoE while powering the door lock from the same cable. At IP65 and rated from −30 °C to 60 °C, it suits outdoor pedestrian gates as well as indoor doors.

Visit the product website

This device is part of Openitem’s Hikvision integration, delivered through Wygress — see what the integration does and the other supported Hikvision models.

Part of the access-control hardware range — readers, controllers, locks and terminals that run with Openitem.

Works with Wygress Supported by Wygress by Openitem as a Hikvision face + fingerprint terminal — faces from each person’s Openitem photo, fingerprints kept centrally and put back on every Hikvision fingerprint terminal they may use, and every scan recorded in Openitem.

How it works with Wygress and Openitem

• Faces from the profile photo — each person’s face is loaded onto the terminal from their Openitem photo, so nobody has to enrol at the door.
• Fingerprints kept centrally — fingerprints are enrolled from Wygress, at the terminal itself, or at a DS-K1F600U-D6E-F enrolment station, and Wygress puts them back on any Hikvision fingerprint terminal the person is given.
• Every scan is an access log — granted or denied, and how the person identified: face, fingerprint, card or a combination.
• Managed remotely — people, visitors, remote door opening, live door and tamper state, camera snapshots, volume and voice prompts, all from the Wygress dashboard.

Technical specifications

• Capacity: 1,500 faces, 3,000 fingerprints, 3,000 cards, 150,000 events
• Face recognition: 2 MP dual lens (WDR); 0.3 to 1.5 m; under 0.2 s per person; accuracy ≥ 99%; face anti-spoofing; mask recognition; face duplicate check
• Fingerprint: built-in sensor, under 1 s
• Cards and PIN: M1 (Mifare) cards at 13.56 MHz; personal PIN set on the terminal or from the platform
• Display and audio: 4.3-inch capacitive touch screen (272 × 480); built-in microphone and speaker; two-way audio and SIP intercom
• Network and protocols: 10/100 Mbps Ethernet; Wi-Fi; ISAPI and ISUP 5.0
• Interfaces: lock output, exit button, door contact, RS-485, Wiegand, tamper, USB
• Power: 12 VDC/1 A adapter (included) or PoE IEEE 802.3at, which also powers the lock at 12 VDC/1 A
• Environment: IP65; −30 °C to 60 °C; 0 to 90% humidity (non-condensing); wall mounting
• Dimensions: 91.3 × 181.3 × 24.5 mm; 0.36 kg

View the datasheet